Ordering Supplies; Ordering Toner Cartridges; Ordering A Photoconductor Kit - Lexmark X264 Maintenance Manual

Ordering supplies

To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies
dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the
place where you purchased the printer.
Warning—Potential Damage: Damage caused by the use of a supply or replacement item not produced by the
manufacturer of this printer is not covered under warranty. Degraded print quality may result from using supplies or
replacement items not produced by the manufacturer of this printer.
Note: All life estimates for printer supplies assume printing on letter- or A4-size plain paper.

Ordering toner cartridges

When 88 Cartridge Low appears or when the print becomes faded:
1
Remove the toner cartridge.
2
Firmly shake the cartridge side-to-side and front-to-back several times to redistribute toner.
3
Reinsert the cartridge and continue printing.
Note: Repeat this procedure multiple times until the print remains faded, and then replace the cartridge.
Recommended toner cartridges and part numbers
Part Name
Toner Cartridge
High Yield Toner Cartridge

Ordering a photoconductor kit

The printer issues a message to let you know the photoconductor kit is near its end of life. At this time, order a
photoconductor kit. You can also see the status of the photoconductor kit by printing a network setup page.
Part name
Photoconductor kit
Regular Cartridge
X264A21G
X264H21G
Maintaining the printer
7
Lexmark Return Program Cartridge
X264A11G
X264H11G
Part number
E260X22G