3. To flatten the roll paper, place it printable-side up between
the pages of the instruction booklet packaged with the roll
paper to protect it. Then, roll the booklet in the direction
opposite of the paper's curl.
4. Remove the paper support and lower the output tray, slide
out the extension (for other than 210 mm roll paper) or attach
the catcher (for 210 mm roll paper), and then turn on the
printer.
For other than 210 mm roll paper
Note:
For details on attaching the catcher for 210 mm roll paper, refer to
"Attaching the Catcher for 210 mm Roll Paper" on page 63.
60