Epson Stylus Photo 925 User Manual page 93

Set the adjust lever to the
Media Type setting in the LCD panel is correct.
Remove each sheet from the output tray as it is printed,
especially if you are using transparencies.
If you are printing on glossy media, place a support sheet (or
a sheet of plain paper) beneath the stack, or load only one
sheet at a time.
When printing on thick media, set the adjust lever to the
position.
Run the Head Cleaning utility.
Load and eject dry paper several times. If the problem
persists, ink may have leaked inside the printer, so wipe the
inside of the printer with a soft, clean cloth.
Warning:
w
Be careful not to touch the gears or rollers inside the printer.
Caution:
c
Be careful not to wipe grease on the metal parts under the
print head path.
^ position, and make sure the
^
Wipe here
91