Power On And Off - Symbol 3100 Series Quick Reference

6

Power On and Off

Note: If the terminal is powered by a NiCd battery, charge the
battery fully before using the terminal.
To turn the terminal on or off, press
Battery Charging and Communications
To charge the PDT 3100's batteries or perform communications,
you have the option of using either a 31XX cradle or the 3115
Communications/Charger Adapter.
3115 Communications/Charger Adapter
The Series 3100 has an optional communications/charger
adapter (CCA) that facilitates communication with a host when
no cradle is available, and provides power to the terminal from
a wall-mounted power supply for battery charging during
terminal use and flash EPROM programming.
Battery Charging
To provide power directly to a terminal for charging the
NiCd battery:
1. Plug the 10-pin RJ41 connector into the base of the Series
3100 terminal.
2. Plug the connector from the 15V power supply,
P/N 55915-00-00 (US, 115V) or 60507-00-00 (International,
230V) into the power input jack (J1) on the CCA.
Quick Reference
.
PWR