Removing A Hard Disk From The Vertical Position - Epson EQUITY 3865X/20 PLUS User Manual

Removing a Hard Disk from the Vertical Position

You
need to remove the hard disk drive from the vertical
position in the following cases:
The drive needs servicing.
You are replacing the drive.
You are adding a second drive (either another hard disk
drive or a diskette drive) in the lower horizontal position.
Follow these steps:
1.
Remove the computer's cover and subassembly, if you have
not already done so. See Chapter 5 for instructions.
2.
Remove the retaining screw securing the hard disk drive
mounting plate to the subassembly and set it aside.
retaining screw '-9
3. Tilt the hard disk drive slightly to the right and lift it up and
away from the subassembly. Set the drive next to the
subassembly so the component side faces up.
Installing and Removing Disk Drives
7-21