Epson EQUITY 3865X/20 PLUS User Manual page 62

Follow these steps to change your built-in
settings:
interface
1. At the
main
current settings
Serial
Parallel
2. Press Enter
see this additional option menu:
Disabled
Primary
Secondary
3. If you want to change the serial port setting, be sure
Serial
is highlighted and press
change the parallel port setting, highlight
Enter.
and press
4. Use J or 'T to highlight the appropriate setting for the port
you selected and press
setting.
Note
If you add an option card with a parallel or serial port and
highlight a setting that causes a conflict between your
built-in port and the port on the option card, you see this
message:
Conflict with option card
Highlight a setting that is appropriate for your system
configuration and press
menu,highlight Serial/Parallel. The
for each
port appear:
Primary
Primary
to move the cursor block into the submenu. You
The cursor block moves into the submenu.
Enter.
Enter.
Running the Setup Program
serial and parallel
Enter.
If you want to
Parallel
The screen displays the new
2-27