Selecting An Option - Epson EQUITY 3865X/20 PLUS User Manual

Selecting an Option

When you are using the System diagnostics program, you often
need to select an option from a menu. There are two ways to do
this:
option you want and then press Enter to select it.
Enter to select it.
For
example, you may see this menu:
1 -
2 -
0
- Exit
Suppose the first option is highlighted. If you want
option, just press Enter (because it is already highlighted). If you
want to select option 2, you can either press
the cursor block to move to that option. Then press Enter to
select it.
Note
You can press Esc any time you want to leave the menu
currently displayed and return to the previous one.
Performing System Diagnostics
C - 4
Run test one time
Run test multiple times
to select that
or 2; this causes