Using Die-Cut Print Function; Using The Auto Power Off - Sony UPX-C300 - Document Camera - Compact Operating Instructions Manual

Using Die-cut Print Function

The die-cut print function allows you to print a captured
image at a size about 3 mm larger than the selected
frame size so that it becomes the target size when the
image is cut. (This is call "die-cut print".) To use this
function, follow the steps below to enable the die-cut
mode.
3, 5
1
Display the SETUP menu.
For details on how to display this menu, see
"Displaying the SETUP Menu" on page 28.
2
Press the v or V control button to select DIE-CUT
MODE.
3
Press the ENTER button.
The DIE-CUT MODE screen appears.
4
Press the v or V control button to select ON.
5
Press the ENTER button.
The SETUP menu returns.
From now on, captured images are printed to a size
about 3 mm larger than the selected ID portrait
frame size.
Note
When the die-cut print function is enabled, the
number of images printed on a single sheet of paper
may be less than with normal printing.

Using the Auto Power Off

When you enable the Auto power off, the camera turns
off if no operation is performed within a certain amount
of time. The amount of time can be set for when the AC
power adaptor is used as well as when batteries are used.
3, 7
2, 4
1
Display the SETUP menu.
For details on how to display this menu, see
"Displaying the SETUP Menu" on page 28.
2
Press the v or V control button to select AUTO
POWER OFF.
3
Press the ENTER button.
The AUTO POWER OFF screen appears.
4
Press the v or V control button and select either
5
Press the b or B control button and select the time
until the power is turned off.
If
select 30min, 10min, or OFF.
If
10min, 7min, or 3min.
If you select OFF, the auto power off is disabled.
6
Press the v or V control button to select OK.
7
Press the ENTER button.
The SETUP menu returns.
(AC power adaptor) or
(AC power adaptor) is specified, you can
(batteries) are specified, you can select
5
2, 4, 6
(batteries).
40
Menu