Adjusting The Print Quality; Adjusting The Picture Quality - Sony UPX-C300 - Document Camera - Compact Operating Instructions Manual

Adjusting the Print
Quality
You can use the MENU function of the camera to adjust
the picture quality. The guide print function of the
camera enables you to check the adjustment results.
For details on the meanings of the values in the CYN-
RED, MAG-GRN, and YEL-BLU displays, see
"Explanation of Picture Quality Adjustment
Parameters" on page 45.

Adjusting the Picture Quality

To adjust the picture quality of color
prints
3 7
1
Display the SETUP menu.
For details on how to display the menu, see
"Displaying the SETUP Menu" on page 28.
2
Press the v or V control button to select COLOR
ADJUST.
3
Press the ENTER button.
The COLOR ADJUST screen appears.
4
Specify each adjustment item.
Press the v or V control button to select the next
adjustment item, and then press b or B to select a
value.
CYN-RED: Pressing b gives the picture more
cyan, while pressing B makes it more reddish.
MAG-GRN: Pressing b gives the picture more
magenta, while pressing B makes it more
greenish.
YEL-BLU: Pressing b gives the picture more
yellow, while pressing B makes it more bluish.
5
6
7
2, 4, 5, 6
To adjust the picture quality of black & white
prints
After pressing the MENU button in step 2 of "To adjust
the picture quality of color prints," press the V control
button. The camera enters the picture quality adjustment
mode for black & white prints and the B&W ADJUST
screen appears. The procedure for adjusting the picture
quality is the same as that for color prints.
DARK: Pressing B increases the darkness in the
dark parts.
LIGHT: Pressing B increases the brightness in the
bright parts.
GAMMA: Pressing b makes the color tone of the
whole picture lighter, while pressing B makes
it deeper.
SHARPNESS: Pressing B makes the edges of
objects in the picture sharper.
Press the v or V control button to select OK, and
then press the ENTER button.
The Guide Print screen appears.
Press the v or V control button to select GUIDE
PRINT-RGB or GUIDE PRINT-DLGm, and then
press the ENTER button.
The guide picture is printed. The picture currently
being played back or the picture taken immediately
previous is used for the guide picture.
For details on the guide print function, see "Guide
Print Function" on page 47.
Press the MENU button.
The SETUP menu returns.
Check the guide picture printed in the previous
step. If necessary, repeat starting from step 2 and re-
adjust the picture quality.
44

Adjusting the Print Quality