Turning On The Power - Sony UPX-C300 - Document Camera - Compact Operating Instructions Manual

To attach the tray cover
Keep the supplied tray cover on the paper tray when not
in use to protect the print paper inside from dust and
other particles. You can attach a tray cover to any of the
UPC-X46, and UPC-X34 series' paper trays.
To connect the printer to a power outlet
Connect the printer to a power outlet using the power
cord.
Printer
Power cord
19
Preparations

Turning On the Power

Tray cover
1
2
3
to power outlet
4
1
N
O PE
PU SH
2
Turn on the printer.
Check that Ready BT RSSI [- - - -] appears on the
operation display.
Set the mode switch to .
Set the POWER switch of the camera to ON.
When turning on the camera for the first time, the
default setting screen appears.
For details on default settings, see "The first time
you turn on the camera (default setting)" on page
20.
The camera starts searching for the printer, and
"DISCOVERING" appears on the LCD. When the
camera finds the printer, "DISCOVERED" appears,
and the printer name and Bluetooth address are
displayed in black on the LCD. If the color of the
printer name and Bluetooth address do not change
to black but remain in gray, turn the printer and
camera off and perform steps 1 through 3 again.
Press any button on the camera.
The Bluetooth display is turned off, and you can
start taking a picture.
3
4