Using The Epson Menu Utility - Epson Equity Ie Q50188015-1 User Manual

4. To exit the program, press
command.

Using the Epson MENU Utility

Your Equity Ie comes with a utility by Epson called the MENU utility. With
this program you can display a menu of utilities and select the one you need.
MENU is easy to use because it lets you execute several commands without
having to remember the exact format for each command.
To access the MENU utility, either log on to the directory that contains the
file MENU.EXE (if you have a hard disk) or insert the Operating 2 diskette
into drive A. Type MENU at the command prompt and press
this main menu:
To select an option, use the arrow keys to highlight your selection and then
press Most options contain submenus; keep highlighting your
Enter.
selection and pressing
Note
If you have a hard disk, you will find it most convenient to use MENU from
the hard disk. Make sure all the necessary MENU files are stored in the
same directory, or use the PATH or APPEND command to tell MS-DOS
where to look for the files. See your MS-DOS manual for information on
the files you need to run MENU.
If you do not have a hard disk, see the section below.
Using MS-DOS with Your Equity Ie
after viewing the information for the last
E
SC
EXIT
File Utilities
Disk Utilities
Mode Settings
Help
Enter DOS Command
until you have selected the desired operation.
Enter
Enter. You see
4-19