Epson Equity Ie Q50188015-1 User Manual page 118

If you cancel formatting at either stage, you see these messages:
Format cancelled.
Press ENTER to return to the menu.
If you continue with formatting, you see:
Now formatting . . .
When formatting is complete, any bad tracks are flagged, and you see a
series of messages like these:
Format finished.
Flagging bad tracks...
Cylinder is xxxx, head is yy
Format completed.
Press ENTER to return to the menu.
Flagged tracks are identified by xxxx and yy. At this point, press
return to the HARD DISK FORMAT MENU.
If there are any tracks with other errors, scanning stops and you see the
message:
Scanning cancelled.
Warning: This drive has an unflagged error
track(s), or is unformatted.
Press ENTER to return to the menu.
Press
Enter.
This may mean that the drive has never been formatted or that an error was
not flagged. If you see this message, it is best to consult your dealer.
Formatting a User-Installed Hard Disk
to
Enter
F-3