Epson Equity 286 PLUS User Manual page 87

5.
The program then asks for the name of a file where the
changes for the new configuration are to be saved. Type the
following and press
WS132.EXE
6. At the Main Installation Menu, select
7. From the console menu, select
8.
Thenchoose
9. At the Screen Siring menu, select B (for width), type
Enter.
and press
installation program.
10. When the installation program asks if you want to save the
new configuration, press Y. The program saves the new
configuration in the WS132.EXE file and the computer
displays the MS-DOS command prompt.
11. Type the command below and press
132-column text mode:
VGAMODE 132, 25
12. Type the following and press
WS132
After you exit WordStar, if you want to return to 80-column
mode, type the following and press
VGAMODE 80, 25
Enter:
Mon i t or .
Screen Sizing.
Press X at each menu to exit from the
Enter
Enhancing System Operations
Console.
Enter
to specify
to start WordStar:
Enter:
132,
4-15