Charging The Battery - Epson Multimedia Photo Viewer P-6000 Basics Manual

Charging the Battery

Plug the AC adapter into the viewer. Connect the power
cord to the adapter and plug it into an electrical outlet.
The
Charge
charge the battery when the viewer is not in use.
Caution:
Do not use the viewer without the battery installed. Turn off
the viewer before disconnecting the adapter.
The battery status is displayed in the upper-right corner
of the screen when the viewer is on:
Battery is fully charged.
Battery power is about half full.
Battery power is low.
Battery is charging.
light turns on. It takes about 3.5 hours to
Charge light
9