Charging - Epson MOVERIO BT-200 User Manual

01_Chapter title

Charging

01_Head A
The product is not fully charged at the time of purchase. Charge before use. 02__lead
This section explains how to charge using the AC adapter. Initial charging takes approximately 5 hours.
1
Connect the headset and the controller.
Insert the headset's connection cable into the controller's headset connection port until it clicks.
2
Connect the controller and AC adapter.
Connect the controller and the AC adapter with the USB cable.
3
Plug in the AC adapter.
The LED indicator flashes light-blue.
Charging is complete when the LED indicator stops flashing and changes to solid light-blue. Disconnect the AC adapter and
the USB cable.
Battery life is approximately six hours. Battery life may vary depending on the applications running and environmental usage
conditions.
12 12
Getting Ready