Connecting A Usb Device - Epson Multimedia Photo Viewer P-6000 Basics Manual

Connecting a USB Device

Before you connect a USB device, connect the AC
adapter to the viewer and plug it in. If your USB device
has an AC adapter, use it to prevent the possible loss of
files during transfer.
Open the connector cover on the side of the viewer.
1
Plug the device into the
2
side of the viewer.
If the device has a USB cable, connect one end of the
cable to the device and the other end to the
USB connector on the viewer.
Note:
To prevent a possible malfunction, do not use both USB
connectors on the viewer at the same time.
Turn on the viewer and the USB device if necessary.
3
USB connector on the
Host
Host
37