Installing The Battery; Charging The Battery - Epson P-6000 User Manual

Installing the Battery

The viewer comes with a lithium-ion battery.
1 Slide the battery cover to the right to open it.
2 Insert the battery into the compartment in the direction
of the arrow on the battery.
3 Close the battery cover and slide it to the left until it
clicks.

Charging the Battery

After installing the battery, you need to charge it using the
AC adapter. It takes about 3.5 hours to fully charge the
battery when the viewer is off, and longer when the viewer
is on.
The light is green while the battery is being
Charge
charged. When the battery is fully charged, the light
turns off.
Getting Started 11