Configuring Easyupdate; Configuring Easyupdate With The Registry - Lenovo ThinkServer TD100 Deployment Manual

(english) easyupdate solution deployment guide

Hide thumbs Also See for ThinkServer TD100:

Hardware maintenance manual (254 pages)

Installation manual (136 pages)

Guía de instalación (134 pages)

Table Of Contents

Table of Contents

Configuring EasyUpdate

Configurations for EasyUpdate can be done through the registry, Active Directory

or the start.reg file. If you are configuring just one system, you can use the registry

to configure EasyUpdate. If you are configuring multiple systems, you can use

Active Directory to configure policies for EasyUpdate. If your enterprise does not

use Active Directory, Lenovo provides the start.reg file that you can configure and

then deploy to multiple systems. For additional information about each

configuration method, see the following sections:

v "Configuring EasyUpdate with the registry"

v "Configuring EasyUpdate with Active Directory" on page 27

v "Configuring EasyUpdate with the start.reg file" on page 34

Configuring EasyUpdate with the registry

To edit registry configurations, close the EasyUpdate application. If EasyUpdate is

running while changes are made in the registry, the old registry entries will be

recovered. After the first launch of EasyUpdate, the configurable items for

EasyUpdate that can be modified are in the following registry locations:

EasyUpdate Solution Deployment Guide

Table 5. Registry locations

Setting

Disable EasyUpdate user interface, see "UC

Settings configurable items" on page 16.

RetryLimit for HTTPSHelloSettings, see "UC

Settings\HTTPSHelloSettings configurable

items" on page 16.

RetryWaitTime for HTTPSHelloSettings, see

"UC Settings\HTTPSHelloSettings

configurable items" on page 16.

Disable EasyUpdate Web upgrade (Update

Thyself), see "UC Settings\

HTTPSHelloSettings configurable items" on

page 16.

RetryLimit for HTTPSPackageSettings, see

"UC Settings\HTTPSPackageSettings

configurable items" on page 17.

RetryWaitTime for HTTPSPackageSettings,

see "UC Settings\HTTPSPackageSettings

configurable items" on page 17.

Proxy server connection, see "Proxy server

configurations" on page 17.

DebugEnable, see "User Settings\General

configurations" on page 18.

DisplayInformationScreen, see "User

Settings\General configurations" on page 18.

DisplayLicenseNotice, see "User

Settings\General configurations" on page 18.

DisplayLicenseNoticeSU, see "User

Settings\General configurations" on page 18.

ExtrasTab, see "User Settings\General

configurations" on page 18.

Registry location