Lenovo ThinkServer TD100 Deployment Manual page 38

Note: To push policy settings immediately after you configure the settings for the
ADM file, complete the following steps:
1. From the Windows Start menu, click Run.
2. Type gpedit.msc /force and then click OK.
Managing network share repositories with Active Directory
This section provides a description of the policy settings for the network share
repository. Setting these policies will prompt an end user for a user name and
password when the EasyUpdate end user interface is launched or when a
scheduled update occurs. When an end user authenticates into a domain and has
appropriate rights to access the network share repository, no prompt for the user
name and password is displayed on the EasyUpdate end user interface. Complete
the following steps to set the policies for the network share repository:
Active Directory enables you to edit policy settings with the Group Policy editor.
To customize the settings for network share repository folder, add the
Administrative Template (ADM file) for EasyUpdate into the Group Policy editor.
Complete the following steps to add the ADM file and to customize the settings:
32
EasyUpdate Solution Deployment Guide
Table 14. Computer Configuration>Administrative
Templates>ThinkServer>EasyUpdate>UCSettings>HTTPSHelloSettings
Policy
HTTPSHelloSettings
1. Download the EasyUpdate ADM file from the Lenovo Support Web site at:
http://www.lenovo.com/support/easyupdate
Note: If you are using an ADM file and Group Policy to set policy settings for
EasyUpdate, ensure you are using the ADM file released specifically for each
version. For example, if you are customizing policies for EasyUpdate 1.0, you
must use the ADM file designed for EasyUpdate 1.0.
2. On your server, launch Active Directory.
3. Click on servername.com and then click Properties.
4. On the Group Policy tab, highlight the New Group Policy Object and click
Edit.
Note: You can also run gpedit.msc and it will launch the Group Policy editor.
5. Right click Administrative Templates.
6. Select Add/Remove Templates.
7. Click Add and then select the tseu.adm file.
8. Click Close on the Add/Remove Template dialog box. The ThinkServer tab is
created.
Note: Under the ThinkServer tab there is an EasyUpdate tab. If you do not
see the applicable policy, ensure your Group Policy editor is set to display all
policy settings.
9. Navigate the Group Policy editor to the following location:
Setting Description
Update Thyself EasyUpdate checks the Lenovo Help Center
Web site for updates for itself, even if it is
connecting to a network share repository. You
can remove the Update Thyself function from
EasyUpdate by clearing this value.