Installing Easyupdate Or Update Retriever; Uninstall - Lenovo ThinkServer TD100 Deployment Manual

Installing EasyUpdate or Update Retriever

Complete the following steps to install EasyUpdate or Update Retriever using a
silent command:
1. Download Update Retriever to the administrator computer from the following
2. Download EasyUpdate for the client system from the following Lenovo
3. Install EasyUpdate or Update Retriever silently by entering the following

Uninstall

To uninstall EasyUpdate and Update Retriever, use the Microsoft Windows
Add/Remove programs. When the uninstall is complete, all program files and
settings are deleted.
To uninstall EasyUpdate and Update Retriever, use the command line. The
following commands for each application are used for a silent uninstall.
10
EasyUpdate Solution Deployment Guide
Table 4. List of parameters with -a (continued)
Parameter Description
/w This parameter forces the
executable defined in the
installation file to execute after
the extraction and to wait
until the installation is
complete before exiting.
Lenovo Support Web site:
http://www.lenovo.com/support/easyupdate
Support Web site:
http://www.lenovo.com/support/easyupdate
command for each program at the command prompt:
setup.exe -s -a /s /v" /qn" /L1033
The following example provides the install command with a pipe symbol that
represents each space in the command. For each pipe symbol, replace with a
space:
setup.exe│-s│-a│/s│/v"│/qn"│/L1033
L1033 is the language code for English. For information about using other
language codes, see "EasyUpdate languages" on page 6.
Note: After you install EasyUpdate or Update Retriever, restart your system to
set the Scheduler function for either program. If you are not using the
Scheduler function of EasyUpdate or Update Retriever, a restart is not needed.
Example
[EasyUpdate installation file
name].exe -a /w
If you extract the installation file
contents first, and then want to
use the /w parameter with the
executable, the installation file
will point to the folder to where
file contents are extracted to and
then starts the executable file
specified in the installation file as
the executable file to start after
the extraction.
For example: Setup.exe /w