Transferring Pictures Using Hotshots - Epson PhotoPC 650 User Manual

Line up the arrow on the cable connector with the port
icon on your Macintosh. Then insert the connector.
.
NOTE
If you share a serial port with another device, make sure
AppleTalk™ is turned off. Your Macintosh may not recognize
the camera if AppleTalk is on. Also, if you have problems
connecting to the printer port, use the modem port instead.
2
Connect the long serial cable to the short Macintosh
adapter cable, then tighten the screws.
3
Open the card and port cover on the side of the camera
and insert the connector on the long serial cable into the
camera's
Macintosh
adapter
4
Turn on your Macintosh system.

Transferring Pictures Using HotShots

To transfer your pictures via the serial cable using HotShots
and the EPSON PhotoPC 650 TWAIN (Windows) or Plug-
In driver (Macintosh), follow the steps in these sections:
Opening the EPSON PhotoPC 650 TWAIN or Plug-In
driver
Saving pictures to a folder, or
Transferring pictures into HotShots
serial port.
Getting Photos Into Your Computer 4-11
A
B