Formatting The Usb Compactflash Card - Epson PhotoPC 650 User Manual

Formatting the USB CompactFlash
Card
Before you use your camera for the first time, you need to
format your USB CompactFlash card so it can store your
pictures. After that, you only need to format the card if a
message appears on the LCD monitor instructing you to do
so or if you want to quickly erase all the pictures it contains.
Make sure you installed the USB CompactFlash card in the
camera (as described on page 1-2), and set the camera's date
and time (as described on page 1-5), then follow these steps:
1
On the back of the camera, set the monitor switch to
PLAYBACK (as shown to the left).
2
Press the SELECT button to display the LCD monitor
menus.
3
Press the or
Control menu. Then press the SELECT button to
display the menu options, as shown below:
Photo Control
Erase
Lock
Reformat
button until you see the Photo
4
Press the or
highlighted, then press the SELECT button. A warning
message appears.
5
Press the SELECT button again to format the card and
return to the Photo Control menu.
6
Press BACK until you return to normal playback mode.
NOTE
Your USB CompactFlash card works with any ATA-compatible
digital camera, such as EPSON's PhotoPC 600, 700, or 750Z
cameras.
If you have problems formatting or using your CompactFlash
card, contact Lexar Media, as described on page 9-10.
button until Reformat is
Getting Started 1-7
A
B