Epson PhotoPC 650 User Manual page 65

You see the EPSON PhotoPC 650 TWAIN or Plug-In
window (the Windows screen is shown below). The
pictures in your camera appear in the window.
Camera Content Setup tab
tab
pictures in
your camera
(If you don't see the pictures in your camera when you
open the window, click Open Camera . If that doesn't
work or you see an error message, see page 4-23.)
If the current transfer speed displayed on the Camera
Content tab is 57600 or lower, see the next section to
select a faster transfer speed.
When you're ready to select the pictures you want to
transfer, see page 4-14.
Changing the Picture Transfer Speed
If the current transfer speed displayed on the Camera
Content tab is 57600 or lower, you can change it to speed
up the transfer. Follow these steps:
current transfer speed
1
2
3
Click the Setup tab. You see the Setup screen:
Click the arrow in the Speed setting list to open it.
Then select 115200 (for Windows) or 230400 (for
Macintosh). If your system won't support these faster
speeds, select the next lower speed.
Click the Camera Content tab to select the pictures
you want to transfer, as described in the next section.
Getting Photos Into Your Computer 4-13
Speed
setting
A
B