Attaching The Hand Strap; Removing The Protective Plastic; Setting The Date And Time - Epson PhotoPC 650 User Manual

Dispose of used batteries according to the
manufacturer's instructions and in compliance with all
applicable laws. Contact your local government agency
for information about battery recycling and disposal.
Battery life varies depending on the battery type, the
manufacturer, and other factors.
Avoid using your camera in low temperatures, especially
below 50 °F (10 °C); this drains your batteries faster.

Attaching the Hand Strap

To attach the hand strap, slide the loop through the holder
on the camera, then pull the strap through the loop.
.

Removing the Protective Plastic

You may need to peel off protective plastic sheets from your
camera's back panel, the status display panel at the top of the
camera, and the viewfinder area on the front of the camera.

Setting the Date and Time

Before you use the camera, you need to set its clock. Then
the camera will automatically record the date and time for
each picture you take. You'll need to set the clock again
whenever you install new batteries.
Follow these steps to set the camera's clock:
1
Slide the lens cover switch up to the ON position to
open the lens cover and turn on the camera.
A
B
lens cover switch
up: ON
Getting Started 1-5