Epson PhotoPC 650 User Manual page 43

Before you start, set the playback mode to Multi . This makes
it easier to select images; see page 3-4 for instructions.
Make sure the monitor switch is set to PLAYBACK , and
follow these steps to erase pictures:
1
Press the SELECT button to display the LCD monitor
menus.
2
Press the or
Control menu, then press the SELECT button to
display the menu options:
Photo Control
Erase
Lock
Reformat
3
Press the SELECT button to enter Erase mode. The
Erase Photos menu is displayed:
Erase Photos
Select Photo
Erase All
button until you see the Photo
4
Press the or
or Erase All .
If you chose Erase All , press the SELECT button.
A message appears asking you to confirm that you
want to erase all the photos. Press the SELECT
button to erase the photos; or press the BACK
button to return to the Erase Photos menu without
erasing the photos.
If you chose Select Photo , continue with step 5.
5
Press the SELECT button, then press the
button to move the white selection box to the photo you
want to erase.
6
Press the SELECT button. The selection box on the
image turns yellow. If you want to erase other photos at
the same time, use the
them, then press the SELECT button to select them.
NOTE
To cancel the selection of a photo, press the SELECT button
again.
button to choose Select Photo
or
or button to frame
Playing Back Pictures 3-7
A
B