Setting The Alert Beep - Epson PhotoPC 650 User Manual

3
Press the SELECT button once to open the settings
menu, then press SELECT again to change the month,
highlighted in white.
4
Press the button to increase the number, or the
button to decrease the number, until the month is
correct.
5
Press the SELECT button. The month setting is saved
and the day setting is highlighted.
6
Adjust the day, year, hour, and minute settings as
described above until the date and time are correctly
adjusted and saved.
7
If you need to change the
Review mode, or LCD brightness settings, see the next
three sections for instructions.
If you're finished changing settings, press the BACK
button until you return to playback mode.
NOTE
You need to reset the time and date whenever you replace the
camera's batteries. In this case, you change the settings through
the Clock Setting menu. See page 1-5 for instructions.
alert beep, Quick

Setting the Alert Beep

The camera's alert beep lets you know when an image has
been captured. Set the monitor switch to PLAYBACK , then
follow these steps to turn the beep on or off:
1
Press the SELECT button to display the menus.
2
Press the or
menu. The current
Settings
05/15/99
: On
: On
3
Press the SELECT button once to open the settings
menu, then press the
setting icon.
4
Press the SELECT button to select On or Off . The
current selection is highlighted. When you turn the
setting on, you hear the camera beep.
5
If you're finished changing settings, press the BACK
button until you return to playback mode.
button until you see the Settings
beep setting is displayed.
05:15
button to select the
Playing Back Pictures 3-13
beep
A
B