Transferring Pictures To Your Computer - Epson PhotoPC User Manual

serial port on computer
5
Turn on the camera and your computer system. A frame appears
around the picture counter on the camera's control panel.
Line indicates that the camera is
connected to your computer.
serial cable
AUTO
TITLE
NOTE
When the camera is connected to your computer, you can't use any of
the control buttons or the shutter button on the camera. You can only
operate the camera through your computer.
The camera's auto shut-off feature remains in effect when the camera is
connected to your computer, but it takes place after 5 minutes of
inactivity. To turn the camera back on, you can slide the power switch
off and on again, or you can use any of the software camera controls on
your computer, as explained in Chapter 5.

Transferring Pictures to Your Computer

Once your camera and computer are connected and turned on, you're
ready to transfer your pictures. You can use the EasyPhoto software that
came with PhotoPC. If you haven't installed the software yet, do it now,
following the instructions on page 1-5.
Using PhotoPC with Your Computer
3
A
3-3