Deleting Images; Formatting A Memory Card; Deleting A Single Image; Deleting All Images - Epson R-D1 User Manual

Deleting Images

In playback mode, you can delete the currently displayed image or all
images.

Deleting a single image

To delete the currently displayed image, follow the steps below.
1. Use the JOG dial to display the image you want to delete, and press
the MENU button. The Main menu is displayed.
2. Select Delete and press the ENTER button. The Delete menu is
displayed.
3. Confirm that Delete 1 image is highlighted, and press the ENTER
button. The confirmation screen is displayed.
4. In the confirmation screen, use the JOG dial to select OK and press
the ENTER button.
Note:
❏ If you want to delete more images, display the next image by rotating
the JOG dial in the unraised position.
❏ You cannot delete a locked image (displayed with the lock (

Deleting all images

1. Press the MENU button in playback mode. The Main menu is
displayed.
2. Select Delete and press the ENTER button. The Delete menu is
displayed.
3. Raise the JOG dial. Use it to select Delete all images and press the
ENTER button. The confirmation screen is displayed.
4. Select OK on the confirmation screen and press the ENTER button.
Note:
❏ You cannot delete a locked images (displayed with the lock (
details, see "Locking Images" on page 38.
37
Viewing and Managing Your Photos
Downloaded from ManualsCamera.com Manuals
❏ When an SD memory card is locked, the message "Cannot delete. The SD
card is write-protected." is displayed. Remove the card from the camera,
then unlock the card and try again.

Formatting a memory card

Format a memory card when you want to erase all the data on the card
or when a message on the LCD monitor instructs you to do so.
To format a memory card, follow the steps below.
1. Use the JOG dial to select Format SD Card in the Camera Settings
menu and press the ENTER button. The Format SD Card menu is
displayed.
2. Select Quick Format or Full Format using the JOG dial, and press
the ENTER button. The confirmation screen is displayed.
3. Select OK using the JOG dial, and press the ENTER button.
The SD card formatting starts and the message "Formatting" is
displayed.
After the SD memory card is formatted, the screen returns to the
Camera Settings menu.
Caution:
c
) icon).
❏ You must format all memory cards in your camera before you use
them.
❏ While formatting an SD memory card, do not take the card out of
the camera.
Note:
❏ When you format an SD memory card, all the data on the card is erased,
including locked images.
❏ When an SD memory card is locked, the message "Cannot format. The
SD card is write-protected." is displayed. Remove the card from the
camera, then unlock the card and try again.
) icon). For