Fax Receive Settings; Auto Reduction; Fax Forwarding - Lexmark 464de - X B/W Laser User Manual

Fax Receive Settings

Menu item
Enable Fax Receive
On
Off
Fax Job Waiting
None
Toner
Toner and Supplies
Rings to Answer
1–25

Auto Reduction

On
Off
Paper Source
Auto
Tray <x>
Multi-Purpose Feeder
Separator Sheets
None
After job
Before job
Separator Sheet Source
Tray <x>
Manual feeder
Sides (Duplex)
On
Off
Fax Footer
On
Off
Max Speed
2400
4800
9600
14400
33600

Fax Forwarding

Forward
Print
Print and Forward
Description
Allows fax jobs to be received by the printer
Note: On is the factory default setting.
Allows a fax to be held until toner or supplies are replaced
Notes:
•
This menu item appears only if a hard disk is supported and installed.
•
None is the factory default setting.
Specifies the number of rings before answering an incoming fax job
Note: 3 is the factory default setting.
Scales an incoming fax job so it fits the size of the paper loaded in the designated
fax source
Note: On is the factory default setting.
Specifies the paper source selected to supply paper for the printer to print an
incoming fax
Note: Auto is the factory default setting.
Places a sheet of paper before or after a received fax.
Note: None is the factory default setting.
Specifies a paper source.
Note: Tray <x> is the factory default setting.
Enables duplex printing (two-sided printing) for incoming fax jobs
Note: Off is the factory default setting.
Prints the transmission information at the bottom of each page from a received fax
Note: On is the factory default setting.
Specifies the maximum speed in baud at which faxes are received
Note: 33600 is the factory default setting.
Enables forwarding of received faxes to another recipient
Understanding printer menus
201