Removing The Battery - Epson 5000 User Manual

P-5000 User's Guide
The Charge lamp lights green during charging. When the battery is fully charged, the
Charge lamp turns off. It takes about 3.5 hours to fully charge the battery when the power
is off, more time if the viewer is in use.
Note:
The viewer stops charging if the battery becomes hot when operating it during charging. In that
case, it starts charging again when it cools down.
If the Charge lamp lights orange, see "Troubleshooting" (page 64).

Removing the battery

1. Make sure that the viewer is turned off.
Caution:
c
Remove the AC adapter if connected.
Never remove the battery while turned on. Doing so may cause data in the card or
HDD to be lost or damaged.
2. Open the battery cover.
3. Push the catch down.
The battery is pushed out.
4. Pull out the battery, then close the battery cover.
Warning:
w
Do not carry loose batteries in your pocket.
Maintenance and Troubleshooting
63