Table of Contents
Advertisement
Other BIOS Error Messages
Message
Following SCSI
disk not found
and no empty
slot available for
mapping it
Following SCSI
IDs have the
same data y, z
Channel x: a, b,
c
Unresolved
configuration
mismatch
between disks
and NVRAM on
the adapter
Chapter 7 Troubleshooting
Problem
The physical disk roaming
feature did not find the physical
disk with the displayed SCSI
ID. No slot is available to map
the physical drive. ADAC
cannot resolve the physical
drives into the current
configuration.
The physical drive roaming
feature found the same data on
two or more physical drive on
channel x with SCSI IDs a, b,
and c. ADAC cannot determine
the drive that has the duplicate
information.
The configuration stored in the
ADAC NVRAM does not match
the configuration stored on the
drives.
Suggested Solution
Reconfigure the array.
Remove the drive or drives
that should not be used.
Press a key to run ADAC
Configuration Manager.
Choose View/Add
Configuration from the
Configure menu.
Use View/Add Configuration
to examine both the
configuration in NVRAM and
the configuration stored on the
disk drives. Resolve the
problem by selecting one of
the configurations.
77
Advertisement
Table of Contents
