Fault-Tolerance Features - Gateway ADAC Ultra2 S466 Hardware Manual

Fault-Tolerance Features

Detect Failed Drive The ADAC Ultra2 S466 firmware automatically detects
Hot Swap
Chapter 4 Features
The ADAC Ultra2 S466 fault-tolerance features are:
automatic failed drive detection,
automatic failed drive rebuild with no user
intervention required,
hot swap manual replacement without bringing the
system down, and
SAF-TE compliant enclosure management.
and rebuilds failed drives. This can be done transparently
with hot spares.
ADAC Ultra2 S466 supports the manual replacement of a
disk unit in the RAID subsystem without system shutdown.
39