Removing From Carton; Loose Parts - Craftsman 247.883550 Operator's Manual

NOTE:References to rightor left sideof the snow throwerare
determined from behindthe unit in the operatingposition(standing
directlybehindthe snow thrower,facing thehandle panel).
REMOVING FROM CARTON
1. Cut the cornersof the cartonand lay the sidesflat on the ground.
Removeand discardall packinginserts.
2. Movethe snowthrowerout of the carton.
3. Makecertainthe carton has beencompletelyemptiedbefore
discardingit.
LOOSE PARTS
Tworeplacementaugershearpinsare includedwith this manual.Refer
to ReplacingShear Pinsin the Operationsectionfor moreinformation
regardingshearpin replacement.
ASSEMBLY
1. Observethelowerrear area of the snowthrowerto be sure both
cablesare alignedwith roller guidesbeforepivotingthe handle
upward.See Figure1.
Figure1
NOTE:Makecertain theupper endsof eachcableare seatedproperly
in its bracket.
2.
Securethe handleby tighteningthe plasticwing knoblocatedon
boththe left and rightsides of the handle.See Figure2. Remove
and discardany rubberbands,if present.They are for packaging
purposesonly.
. +",,
/
//
Figure2
8