Table of Contents
Advertisement
3.4.6
PnP/PCI Configuration
This section of Setup provides options for configuration of devices connected to the ETX-945's PCI bus, including
the choice between automatic "plug-and-play" (PnP) configuration of IRQ and DMA channel settings. If PnP is
disabled, you can specific desired IRQ and DMA channels for PCI devices here.
3.4.7
Other Settings and Utilities
A few additional status and control functions are available from Setup's main menu. These include:
CPU temperature status
CPU cooling fan status
CPU voltage status
Reload default BIOS settings
Set system boot password
Exit Setup with or without saving changes
3.5 Operating System Drivers
Drivers for Windows XP and Linux 2.6, if required, are included on the Software and Documentation CD that is
provided along with the ETX-945 or in its Development Kit. To locate the ETX-945 module's software drivers on
the CD, view the index.html file in the CD's root directory, locate "Computer-on-Modules," and then click on "ETX-
COMs." This software is also available for download from
3.6 BIOS Beep Code List
Beep Sound
1 short
2 short
1 long + 1 short
1 long + 2 short
1 long + 3 short
1 long + 9 short
long (continuous)
short (continuous)
ETX-945 User Manual 1.02
Diamond's
Message
System is booting normally
CMOS setting error
DRAM error
Display card or monitor connected error
Keyboard error
ROM error
DRAM not inserted correctly
Power supply problem
www.diamondsystems.com
website.
Page 14
Advertisement
Table of Contents
