How To Remove The Auger - Craftsman 536.881400 Operator's Manual

[.,,."_o,,_ V_I Z IB]P'_"_
HOW TO REMOVE THE AUGER
1. Remove the belt cover. See "How
To Remove The Belt Cover".
Remove the auger drive belt. See
"How To Remove The Auger Drive
Belt" in the Service And Adjustment
section.
3. Remove the auger pulley from the
auger shaft (threads are left hand;
turn clockwise to remove).
4. To keep the auger from rotating, set
a 2"x4" piece of wood on the cen-
ter paddle to secure auger,
5. Remove bolts A, washer F, and nuts
B from front of right cover (See
Figure 23).
6. Remove screw C from back of right
cover.
8. Slide the auger out of the right side
of the auger housing (See
Figure 22).
9. Slide the auger out of the bearing
on the left side of the auger hous-
ing.
10. To install the auger, reverse the
above steps.
Washer
7. Remove bolts D and nuts E, Auger Figure 22
C
/
AF
Right Cover
A
B
B
B
Auger
Housing
Auger
E
Auger Pulley
Figure 23
F-051009C 21