Accessories; Carton Contents; Unpacking And Checking Contents; Unpacking Your Band Saw - Craftsman 137.224120 Owner's Manual

::{ECOMMENDED ACCESSORUES
'isit your Sears Hardware Department or see the
;raftsman Power and Hand Tool Catalog to purchase
_commended accessories for this power tool.
O avoid the risk of personal infury, do not modify the
ower tool or use accessories not recommended by Sears.
ITEM
Blade: 1/8", 1/4", 3/8", 1/2" wide, 91 "- 91 1/2" long
Sandpaper belt: 1/2" wide, 91"- 91 1/2" tong
Ise of improper accessories may cause hazards. Follow
]structions that accompany accessories. Do, not use any
ccessory unless you have completely read the instruction
r owner's manual for that accessory.
UNPACKING AND CHECKING CONTENTS
To avoid injury from unexpected starting, do not plug the
power cord into a power source receptacle during
unpacking and assembly. This cord must remain unplugged
whenever you are assembling or adjusting the saw.
1. Carefully unpack the band saw and aU its parts, and
compare against the illustration on page 7.
2. Place the saw on a secure surface and examine it
carefully.
Although compact, this saw is heavy. To avoid back injury,
get help whenever you have to lift the saw.
If any part is missing or damaged, do not plug the band
saw in until the missing or damaged part is replaced, and
assembly is complete.
TABLE OF LOOSE PARTS
_TEM DESCRIPTION QUANTITY
A Band saw 1
B Table w!insert t
C Trunnion 1
D Star handle table knobs 2
E Table alignment pin 1
F Medium hex bolts 4
G Washers 8
H Hex nuts 4
I Short hex bolts, nut, and washers 2
J Long hex bolt w/nut 1
K Saw dust port assembly 1
L Miter gauge 1
M Power cord wrap brackets 2
N Phillips screws 2
STAND:
O Legs 4
P Long leg brackets 2
Q Short leg brackets 2
R Plastic feet 4
S Leg stand top plate 1
T Hex wrench 1
U Miscellaneous bag of carriage
bolts, nuts and washers
6
UNPACKUNG YOUR BAND SAW
A
B
C
G
H
E
J
K
M N
i 0 O0
i O_ 0[3
I O0 O0
O0 O0
o
P
Q
S T
R
U