Table Of Contents - Furuno GP-30 Operator's Manual

TABLE OF CONTENTS

FOREWORD
...................................... v
1. OPERATIONAL
OVERVIEW
1.1 System Configuration .................... 1-1
1.2 Control Description ....................... 1-2
1.3 Turning On and Off the Power....... 1-3
1.4 Adjusting Display Dimmer and
Contrast .......................................... 1-3
1.5 Display Modes ............................... 1-4
1.6 Basic Menu Operation ................... 1-7
1.7 Simulator Display .......................... 1-8
2. PLOTTER DISPLAY
OVERVIEW
2.1 Enlarging/Shrinking the Display.... 2-1
2.2 Shifting the Cursor ......................... 2-1
2.3 Shifting the Display ....................... 2-2
2.4 Centering Own Ship's Position ...... 2-2
2.5 Changing Track Plotting Interval,
Stopping Plotting of Track ............. 2-2
2.6 Erasing Track ................................. 2-3
3. WAYPOINTS (MARKS)
3.1 Entering Waypoints ........................ 3-1
3.2 Entering the MOB Mark ................ 3-3
3.3 Displaying Waypoint Name ........... 3-3
3.4 Editing Waypoints on the
WYPTS/MARKS List ................... 3-4
3.5 Deleting Waypoints ........................ 3-4
4. ROUTES
4.1 Creating a Route ............................ 4-1
4.2 Editing a Route .............................. 4-2
4.3 Deleting a Route ............................ 4-4
5. SETTING, CANCELLING
DESTINATION
5.1 Setting Destination by Cursor ........ 5-1
5.2 Setting Destination by Waypoint ... 5-1
5.3 Setting Route as Destination .......... 5-2
5.4 Canceling Destination .................... 5-2
6. ALARMS
6.1 Arrival Alarm, Anchor Watch
Alarm ............................................. 6-1
6.2 XTE (Cross Track Error) Alarm .... 6-3
6.3 Speed Alarm................................... 6-3
7. OTHER FUNCTIONS
7.1 Calculating Range, Bearing
and TTG ......................................... 7-1
7.2 DGPS Setup ................................... 7-2
7.3 Bearing Reference ......................... 7-2
7.4 Magnetic Variation ......................... 7-3
7.5 Geodetic Chart System .................. 7-3
7.6 Units of Measurement .................... 7-4
7.7 Displaying Position in LOPs.......... 7-4
7.8 Time Difference (using local time) 7-4
7.9 GPS Setup ...................................... 7-5
7.10 Uploading, Downloading
Waypoint, Route Data .................. 7-6
8. MAINTENANCE &
TROUBLESHOOTING
8.1 Maintenance ................................... 8-1
8.2 Displaying the Message Board ...... 8-1
8.3 Displaying the GPS
Satellite Monitor Display ............... 8-1
8.4 Self Test ......................................... 8-2
8.5 When "BATTERY ALARM!"
Appears .......................................... 8-3
8.6 Clearing Data ................................. 8-3
iii