Indicators Provided By The Device - Fujitsu Siemens Computers CELSIUS M Operating Manual

Operation

Indicators provided by the device

The indicators are on the front of the casing. Which indicators are available on your device depends
on the configuration level you have selected.
1 2
1 = Hard disk indicator
2 = Power-on indicator
3 = Drive indicator, e.g. DVD
Hard disk indicator
The indicator lights up when the hard disk drive of the device is accessed.
Power-on indicator
● The indicator lights up green:
The device is switched on.
The display can also light up green if the device has been switched off by
i
holding the ON/OFF switch (see "Troubleshooting and tips").
● The indicator lights up orange:
The device is ready-to-operate or in energy-saving mode. After being switched on with the
power button, the device switches on or returns to the state it was in before the energy-saving
mode.
In the energy-saving mode the device may not be disconnected from the mains
!
supply, as this may otherwise result in data loss.
● The indicator does not light up:
The device is switched off.
18
3
4
4 = Floppy disk indicator (optional)
5 = SmartCard reader indicator (optional)
A26361-K990-Z120-1-7619, Edition 6
5