Fujitsu PCI Gigabit Ethernet User Manual page 67

Table A.4 Messages Reported by Machine Administration
No Message
1 fjgi_device_check: fjgi_hw_deinit failed !
2 fjgi_device_check: fjgi_hw_init failed !
3 pci_config_setup_failed
4 Autonegotiation_failed
Meaning
An error occurred during
initialization of the adapter.
An error occurred during
initialization of the adapter.
The driver could not allocate
sufficient PCI configuration
space.
The Auto-Negotiation of
1000BASE-SX failed.
- 61 -
Workaround
The version number of the driver may not
support this hardware. Please apply any
applicable patches described in the
Installation Guide. If the problem
persists, there is a possibility of hardware
abnormalities. Please replace the adapter.
There is a possibility of hardware
abnormalities. Please replace the adapter.
There is a possibility of a resource
shortage or hardware abnormalities.
Please check the memory usage and
adapter installation status.
Check the transmission mode and the
adapter hardware.