Display Linkaggregation Statistics And Information (Dladm Show-Aggr) - Fujitsu PCI Gigabit Ethernet User Manual

-
Solaris 10 8/07 or later
-
The following example shows how to remove the interface "fjgi2" from the "key=1" LinkAggregation Group:
# /usr/sbin/dladm remove-aggr -d fjgi2 1
-
Solaris 11
-
The following example shows how to remove the interface "fjgi2"(this vanity name is net4) from the "aggr-link=aggr1"
LinkAggregation Group:
# /usr/sbin/dladm remove-aggr -l net4 aggr1
Note
-
If the LACP mode is off, do not use this command.
-
After rebooting the system, the LinkAggregation settings remain effective.
-
For more information about this command, please refer to the "man pages section 1M: System Administration Commands" of Oracle
Documentation.

4.2.1.6 Display LinkAggregation Statistics and Information (dladm show-aggr)

This section explains the dladm show-aggr command for displaying statistics and information for LinkAggregation Groups.
- 53 -