Remove Interfaces From A Linkaggregation (Dladm Remove-Aggr) - Fujitsu PCI Gigabit Ethernet User Manual

-
Solaris 10 8/07 or later
-
The following example shows how to add the interface "fjgi3" to the "key=1" LinkAggregation Group:
# /usr/sbin/dladm add-aggr -d fjgi3 1
-
Solaris 11
-
The following example shows how to add the interface "fjgi3"(this vanity name is net5) to the "agg-link=aggr1" LinkAggregation
Group:
# /usr/sbin/dladm add-aggr -l net5 aggr1
Note
-
If the LACP mode is off, do not use this command.
-
After rebooting the system, the LinkAggregation settings remain effective.
-
For more information about this command, please refer to the "man pages section 1M: System Administration Commands" of Oracle
Documentation.

4.2.1.5 Remove Interfaces from a LinkAggregation (dladm remove-aggr)

This section explains the dladm remove-aggr command for removing interfaces from a LinkAggregation.
- 51 -