Fujitsu PCI Gigabit Ethernet User Manual page 39

Propertiy
adv_autoneg_cap
mtu (*1)
flowctrl
adv_10fdx_cap
en_10fdx_cap
adv_10hdx_cap
en_10hdx_cap
adv_100fdx_cap
en_100fdx_cap
adv_100hdx_cap
en_100hdx_cap
adv_1000fdx_cap
en_1000fdx_cap
adv_1000hdx_cap
en_1000hdx_cap
Status
Read and write
Read and write
Read and write
Read only
Read and write
Read only
Read and write
Read only
Read and write
Read only
Read and write
Read only
Read and write
Read only
Read and write
Auto-Negotiation Setting
0: Auto-Negotiation Off (Forced mode)
1: Auto-Negotiation On (default)
MTU (byte) Setting
1500 to 9000 (default: 1500)
Flow_Control Setting
no: None (flow_control disabled)
tx: Local Send (Can transmit pause frame only)
rx: Remote Send (Can receive pause frame only)
bi: Symmetric (Can receive and transmit pause frame)
pfc: Priority-base (Can receive and transmit pause frame includeing
thr priority value) (not supported)
auto: Auto (mode is dynamically determined) (not supported)
10Mbps/FullDuplex Actual Setting
0: Disabled
1: Enabled
10Mbps/FullDuplex Setting
0: Disabled
1: Enabled (default)
10Mbps/HalfDuplex Actual Setting
0: Disabled
1: Enabled
10Mbps/HalfDuplex Setting
0: Disabled
1: Enabled (default)
100Mbps/FullDuplex Actual Setting
0: Disabled
1: Enabled
100Mbps/FullDuplex Setting
0: Disabled
1: Enabled (default)
100Mbps/HalfDuplex Actual Setting
0: Disabled
1: Enabled
100Mbps/HalfDuplex Setting
0: Disabled
1: Enabled (default)
1000Mbps/FullDuplex Actual Setting
0: Disabled
1: Enabled
1000Mbps/FullDuplex Setting
0: Disabled
1: Enabled (default)
1000Mbps/HalfDuplex Actual Setting
0: Disabled
1: Enabled
1000Mbps/HalfDuplex Setting
0: Disabled
1: Enabled (default)
- 33 -
Meaning