Haier XQS80-828 User Manual page 9

5 Use the operation button
Description of operation button
K
DELAY
FIRST RINSE
SECOND RINSE
THIRD RINSE
RESERVE
DRYING
WATER
SOAK WASH RINSE SPIN
Indicator mode and meaning
Off
Flashing, indicating the running program
On, indicating the program about to run or the selection mode
Child lock function
The function is intended for children safety and preventing the washing program from accidental changes by children.
Push and hold the water level button and spin button, then push down the power on/off button .The digitron displays
You can continue setting desired washing procedures. After setting ,push down the start/pause button. The child lock
function is activated. all of the buttons are locked and cannot make selection .
Release the child lock function :push down water level button and spin button at the same time for more 2seconds .
After a beep sound ,the child lock function is released.
A "POWER" button
Push the "POWER" button to switch on the power.
POWER
Under power-on mode, push it to switch off the power.
ON/OFF
Push the "POWER" button to switch on the power. If the "START/PAUSE" button is not pushed, the machine will switch
off the power automatically after 5 minutes.
B "START/PAUSE" button
START
After the power is switched on, press it to start the machine
PAUSE
During working, push it to pause.
During pause, push this button to restart and go on working
C "PROGRAM" button
Program Application
The commom wash , the washing machine
will set to MEMORY program including
MEMORY
"wash, rinse,spin,water value "automatically
last time
PROGRAM
BLANKET
Washing the relatively big and thick laundriesr
CHILD Washing for children laundries,
Quick washing for normal laundries
QUICK
10
POWER
SET
ON/OFF
MEMORY STANDARD
Í ° ¸ É Ô ï
BLANKET COTTON
CHILD WOOL START
QUICK
TUB DRY PAUSE
WATER
VALUE
Program
Application
STANDARD Standard saving washing for normal laundries
COTTON Washing the cotton textiles
Washing for the woollen laundries,
WOOL under 2.5kg
Í ° ¸ É Ô ï ¸ É Ô ï Ä Ú Í â Í ° £ ¬ · À Ö ¹ Ï ¸ ¾ ú × Ì É ú
Avoid growing mildew on the outer tub and the
TUB DRY
inner tub
Connection between the water inlet hose and the washer
1.Do not take off the water absorption cushion. Please check if the
cushion is dropped or damaged before each usage. If it happens
please contact our after-sale department immediately.
2 .Put the nut of the water inlet hose on the valve jointer.
3 .Fasten the nut. Swing it gently to confirm if it's suitable.
Connection between the jointer of the water inlet hose and the water inlet hose
1.Push down the slider. Insert the water inlet hose into the jointer.
2 Hang the lock lever to the jointer. Release the slider till a click
sound is heard.
.
Check the connection between the jointer of the water inlet hose
and the water faucet
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
Dismantle the water inlet hose
1. Close the water faucet.
2. Press the locking lever. Push down the slider. Then pull of the water inlet
hose.
If the machine is used frequently, the jointer of the water inlet hose can be
kept on the faucet to prevent damaging the fixing screw.
nut of the water
inlet hose
jointer of the water absorption
water inlet valve cushion.
the jointer of the
water inlet hose
Locking level
Slider
Locking level
Slider