Page 1
Environment-friendly double-driver automatic washing machine This manual is for XQSB60-JN Please read this manual carefully before using. Retain it for future reference. User's manual Special number:0030806318...
Contents Names of the parts...1 Safety precautions ...2 Installation and adjustment ...4 I n s t a l l t h e w a t e r i n l e t h o s e ... . 6 P r e p a r a t i o n b e f o r e w a s h i n g .
Names of the parts Water inlet valve Top lid handle Top lid component Water absorption cushion Inner cover component Front control board Fixed leg (3 pieces) Back cover Drain hose Decorative board Adjustable leg film Meaning and description of the symbols Contents marked with that symbol are related to the Warning sign safety of the product and the personal safety of the...
Safety precautions Please insert the power cord into special receptacle with rated voltage. Be sure to use single-phase three pins receptacle. Ensure the earthing prong of the power receptacle is earthed reliably. Use leakage protector if possible. Do not bend, stretch, twist, bind the power cord by force, or reform it. Do not press or clamp it with heavy items.
Page 5
Please don't use the washer in the environment below 0 be sure to ensure the washer is placed under the room temperature for 24 hours and then use otherwise the washing effects may be lowered or the washer may be damaged.
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the inner cover component 1.Open the top lid of the washing machine. 2.Put the inner cover component on the outer tub cover, aiming the inner cover shaft to the installation hole of the corresponding outer tub cover shaft groove.
Install the water inlet hose Confirm the water faucet water faucet, suitable The exit end face of the faucet It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water faucet 1.Press the lower end of the lock lever and push down the slider.
Page 9
Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2 Put the nut of the water inlet hose on the valve jointer.
Do not connect the earth terminal to the gas pipe and tap water pipe. 4. The ground inclination or unevenness may cause the washer operating not steadily or cause noise, please set level the washer. Fasten the buttons The quantity of the and zippers.
4 Put in the laundries 5 Close the top lid Besides drainage if opening the top lid the washer will stop and give an alarm. How to use the softner The usage and dose of the softener as per the specifications of softener.
6 Use the operation buttons a. Description of the function of buttons Mode and meaning of the indicators On: indicate the program about to run, or indicate the selected mode "Function" button Push it to set the wash function. If "no detergent" function is activated, the "no detergent"...
Page 13
Reserve/remain time indicator digitron During sensing, it displays -- During reserve procedure, it displays the remained reserve time (in hours) During operation of programs, it displays the remained time (minutes). If the remained time exceeds99 minutes, it adopts A at tens place to represent 100 minutes, b to represent 110 minutes.
Page 14
Description and Attention of Dry-clean Dry-clean: used to wash laundries with dry-clean mark or requiring gentle washing(laundries volume below 1.2kg) Laundries suitable for dry-clean Laundries with dry-clean mark: woolen sweater, linen textiles, silk textiles etc. Woolen sweater Silk or linen one-piece, smock, shirt,etc.
Page 15
Description and Attention of Dry-clean Preparations before washing If laundries are soiled, put towel at the inside. Add detergent, and wipe off the soil gently with gauze and brush. In washing soiled sleeves, collar, trousers leg, pocket, Dip the brush in detergent and wipe off the soil gently.
Page 16
b.Steps of using the operation buttons and description of the steps No Washing Powder Disinfect WASH RINSE FUNCTION SOAK 1.Push the "POWER " button to switch on the power. 2.Push the "PROGRAM" button to select suitable automatic program After switching on the power, the machine will set normal program automatically. To select other automatic program, push the "program"...
Page 17
When soaking, first soak for about 10- 40 minutes after water filling and then wash, rinse, and spin. When selecting quick, posthaste, and dry-clean program the washer will automatically run the overall process of setting the water level, washing, rinsing, spin (when selecting quick program water level can be manually selected.).
6.Push the "reserve" button to select suitable reserve wash program After switching on the power, the reserve program is set to off mode automatically. If you need to set the washing procedure to be finished at reserved time, please push the " reserve " button to set the reserve wash program.
8 Disposal after washing Please first pull off the power plug from the receptacle before cleaning. After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. If the tap water quality is bad, it can generate scale attached onto the water injection box and filling entrance of outer tub cover.
Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company.
Rated washing/spinning capacity (weight of standard dry cloth) This washer can run for ten years (equivalent times) if using the function and running three times weekly. After running up to the above number this washer can still be used as a common double-driver washer.