Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung LN40C630 Operator's Manual

When the T\/is initially powered on, b asic settings proceed automatically.
Connecting the mains and antenna
When the T\/is initially powered on, a sequence ofon-screen prompts will assist inconfiguring basic settings. Press the
POWERO button. Plug & Play i savailable only w hen the mnput source isset t oTV.
To return tothe previous step, press the red button.
Selecting alanguage
Selecting Store D emo
orHome Use
Selecting an an-[enna
Selecting achanneJ
Setting the Clock
Mode
Viewing the HD
Connection Guide
Enjoy your IV.
Press the Aor_!" b utton, then p ress the EN1LR C#button. POWER
Select the desired OSD ( On S creen Display) language.
Press the _1 orI_button, then p ress the lITER C#button.
o Select the Home Use m ode. Store D emo Mode isfor r etail
environments
, To return the unit's settings from Store Demo to Home Use
(s]:anclarcll:Press the volume button on the T\Z When you see the
volume in the OSD, press and hold MENU for 5 sec
Press the a, or T button, then press the E_/lER C# button. Select Air, Cable or Auto.
_, n Cable mode, you can select the correct signal source among STD, HRC, and taRO
sy pressing the a,, T, _ or _ button, then press the ENIER _ button.
The channe search will start automatically.
For more informatior., refer to Channel --_Auto Program. (R 12)
<_ _ress the ENTER _ button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
_, If y su selec_ the Auto, set the daylight saving time
Select the time zone which you live
The connection method for the best HD screen quality is displayed.
Press the ENI_ER_ button,
_fYou Want to Reset This Feature...
_} MENU nTI _ Setup _ Plug & Play _ ENTER _
English