Connecting To A Wireless Network - Samsung LN40C630 Operator's Manual

Advanced Features
Connecting to a Wirebss Network
To connect your TV to your network wireless,, 'ou need a wireless router or modem and a Samsung Wireless LAN Adapter
_/IS09ABGN,WIS09ABGN2,WIS10ABGN), which you connect to your TV's side panel USB jack. See the illustrationbelow
To use the SWL(Samsung Wireless Link) function, connect to the USB I (NDD) port
Tile LANPort on Wirebss IPsharer _ -PJSidePand
the Wall (APhavi_ __jj_. _ r_]
l
Sam_ung Wir÷l_,_ Ii?;"_
/
LAN Cabb /,k,,_ _ i
Samsung's Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts,
com. Samsung's Wireless LAN adapter supports the IEEE 802,11A/B/G and N communication protocols. Samsung
recommends using IEEE 802,11 N, When you play video over a IEEE 802,11B/G connection, the video may not play smoothly.
NOTE
° You must use the Samsung Wireless LAN Adapter" (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless
network.
o Samsung Wireless LAN Adapter and the USB extension Gable are sold separately and are offered by select retailers,
Ecommerce sites and Samsungparts com.
o To use a wireless network, your TV must be connected to a wireless IP sharer (either a router or a modem). If the
wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network
" Select a channel for the wireless IP sharer that is not currently being used_ If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
o If you apply a security system other than the systems listed blow, it will not work with the TV.
o If Pure High-throughput (Greenfield) 802,11n mode is selected and the Encryption type is set to WEP, TKIP or
TKIPAES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi
certification specifications,
o If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button
Configuration) or PIN (Personal Identification Numbe¢ WPS will automatically configure the SSID and WPA key in
either mode,
o Keep the Samsung Wireless LAN Adapter at a distance from the TM If you watch the TV with the Adapter connected
nearby, images may appear corrupted for some channels.
o if your router, modem, or device is not certified, it may not connect to the TV via the "Samsung Wireless LAN Adapter."
o Connection Methods: You can setup the wireless network connection on six ways,
- Samsung Auto Configuration - For non-Samsung devices,
- PBCONPS)
- Auto Setup (Using the Auto Network Search function)
- Manual Setup
- SWL(Samsung Wireless Link) - For Samsung devices only,
- Ad4qoc
o Samsung Wireless LAN Adapter and The USB extension Cable are sold separately and are offered by select retailers,
Ecommerce sites and Samsungparts,com.
6 English