When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
Turn on the TV and
Connect the Samsung
Wireless LAN Adapter
Selecting a language
Selecting Store Demo
or Home Use
Selecting an antenna
Selecting a channel
Setting the Clock
View the HD
Enjoy your TV.
If You Want to Reset This Feature...
→ Setup → Plug & Play → ENTERE
Connecting to an Antenna
Plug & Play (Initial Setup)
y Turn on the Touch Control and then tap OK on
It may take about one minute to establish a
wireless connection between the TV and Touch
Control using the Samsung Wireless LAN
y Connect the Samsung Wireless LAN Adapter to the TV. You can connect the Samsung
Wireless LAN Adapter using the method shown on page 35.
y If the connection fails, reconnect the Samsung Wireless LAN Adapter and then try
Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
y Select the Home Use mode. Store Demo Mode is for retail environments.
y To return the unit's settings from Store Demo to Home Use (standard): Press the
volume button on the TV. When you see the volume OSD, press and hold
Press the ▲ or ▼ button, then press the ENTERE button. Select Air, Cable or Auto.
Press the ▲ or ▼ button, then press the ENTERE button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel → Auto Program (p. 16).
Press the ENTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
y Manual: Allows you to manually set the current date and time (p. 26).
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
Antenna Cable (Not Supplied)