Download  Print this page

Connecting To An Antenna; Plug & Play (initial Setup) - Samsung BN68-03088A-02 User Manual

Series 9 9000 led tv.
Hide thumbs

Advertisement

Table of Contents
Getting Started
When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
1
Turn on the TV and
Touch Control.
2
Connect the Samsung
Wireless LAN Adapter
3
Selecting a language
4
Selecting Store Demo
or Home Use
5
Selecting an antenna
6
Selecting a channel
7
Setting the Clock
Mode
8
View the HD
Connection Guide
9
Enjoy your TV.
If You Want to Reset This Feature...
O
MENU
→ Setup → Plug & Play → ENTERE
10
English

Connecting to an Antenna

Plug & Play (Initial Setup)
y Turn on the Touch Control and then tap OK on
your remote.
It may take about one minute to establish a
wireless connection between the TV and Touch
Control using the Samsung Wireless LAN
Adapter.
y Connect the Samsung Wireless LAN Adapter to the TV. You can connect the Samsung
Wireless LAN Adapter using the method shown on page 35.
y If the connection fails, reconnect the Samsung Wireless LAN Adapter and then try
again.
Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
y Select the Home Use mode. Store Demo Mode is for retail environments.
y To return the unit's settings from Store Demo to Home Use (standard): Press the
volume button on the TV. When you see the volume OSD, press and hold
sec.
Press the ▲ or ▼ button, then press the ENTERE button. Select Air, Cable or Auto.
Press the ▲ or ▼ button, then press the ENTERE button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel → Auto Program (p. 16).
Press the ENTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
y Manual: Allows you to manually set the current date and time (p. 26).
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
VHF/UHF Antenna
or
Antenna Cable (Not Supplied)
Cable
ANT OUT
MENU
for 5

Advertisement

Chapters

Table of Contents

   Related Manuals for Samsung BN68-03088A-02

Comments to this Manuals

Symbols: 0
Latest comments: