Maintenance; Accessories; Lubrication - Craftsman 315.218061 Operator's Manual

A
A
A
WARNING: When servicing, use only identical
replacement parts. Use of any other parts may create
a hazard or cause product damage.
WARNING: Always wear safety goggles or safety
glasses with side shields during power tool operation
or when blowing dust. If operation is dusty, also wear
a dust mask.
WARNING: Before performing any maintenance,
make sure the tool is unplugged from the power
supply and the switch is in the off ( O } position.
Failure to heed this warning could result in serious
personal injury.
GENERAL
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
,_ WARNING: Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating
oils, etc., come in contact with plastic parts.
Chemicals can damage, weaken, or destroy plastic
which may result in serious personal injury.
[] Periodically check all clamps, nuts, bolts, screws, and
belts for tightness and condition. Make sure the throat
plate is in good condition and in position.
[] Check the blade guard assembly.
[] To maintain the table surfaces, fence, and rails,
periodically apply paste wax to them and buff to
provide smooth functioning. To prevent work from
slipping during cutting operation, Do not wax the
working face of the miter fence.
[] Protect the blade by cleaning out saw dust from
underneath the table and in the blade teeth. Use a
resin solvent on the blade teeth.
[] Clean plastic parts only with a soft damp cloth. Do
not use any aerosol or petroleum solvents.
LUBRICATION
This saw has been lubricated at the factory prior to ship-
ment. Following extended use, you should inspect and
lubricate the following areas to assure smooth operation.
The following recommended accessories are currently available at retail stores:
0134010313 Dado Throat Plate
_ WARNING: Current attachments and accessories available for use with this tool are listed above. Do not use
any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or
accessories not recommended can result in serious personal injury.
38