Changing The Battery; Active Lock - Autopage C3-RS-625 Operation Manual

CHANGING THE BATTERY IN YOUR TRANSMITTERS
XT-33: This transmitter uses two (2) 3-volt lithium ion batteries (#CR2016)
that are sandwiched together with the (+) side facing upward. To replace
the battery, you will need to use a small flat blade screwdriver. Locate the
small notch on the lower right side of the transmitter case next to the key
ring. Using the flat blade screwdriver, carefully pry the top case from the
bottom case.
removing the batteries note the direction of the positive (+) terminal.
Place the new batteries in exactly the same manner, being careful not to
bend or damage the contact terminal. Snap the cases back together and
then test the transmitter to insure it arms and disarms the alarm.
XT-43 LCD 2-Way
Transceiver
(1) AAA Battery

ACTIVE LOCK:

1. Press button on the transmitter.
2. The Siren will chirp once and parking lights will flash once indicating that
the system is now active. The vehicle doors will lock upon activating
only when interfaced with the keyless entry system.
It should snap apart after breaking the seal.
XT-33
Standard Remote
3
Before
(2) CR2016
3-Volt Batteries